Automatic Disinfection Channel System
Automatic Disinfection Channel System is used for emergency disinfection of the surface of people, pets, goods and other objects passing through the entrance of public space. And it is the device that non-contact detection of body temperature for personnel. It is simple, safe, intuitive, accurately determine whether there is an abnormal body temperature of the personnel. There will be a voice alarm if it is the abnormal situation (temperature is higher than the set temperature), then the people cannot pass through the disinfection device.
|Quantity(Pieces)||1 - 50||>50|
|Est. Time(days)||15||To be negotiated|
Automatic Disinfection Channel System
1.Infrared human body temperature measurement. Acousto-optic alarm uses high-precision infrared spectrum sensor, which is calibrated by blackbody radiation source. It can measure body temperature remotely and without contact. It can effectively avoid cross infection of body temperature. Normal voice prompt of body temperature. Voice prompt of overheating alarm
2.Intelligent display: body temperature display can adjust the temperature difference of seasonal changes, and display the body temperature more accurately
3.Hand washing intelligent spray disinfection: the temperature zone is equipped with intelligent induction sprayer, non contact induction spraying, safe and hygienic, and can effectively disinfect the opponent's department.
4.Automatic induction ultrasonic fog, stop when people go: microwave sensor is installed at the equipment port, which can sense that someone enters, start the fog making machine automatically, spray disinfectant into the channel, and stop automatically after people leave to avoid waste of liquid
5.Equalizing spray box, thinning throttling, not damaging facial organs: equalizing spray in disinfection channel, not directly spraying human facial organs, fogging more thinner and not wasting.
6.Centralized collection function of waste liquid: there is a circulation tank inside the disinfection channel, which can collect and treat the surplus disinfectant liquid in a centralized way to avoid pollution to the surrounding environment
7.Equipment status reminder function: the equipment has status reminders such as work, lack of liquid, light and voice, so that the equipment management staff can accurately grasp the operation status of the equipment. Real time trends of various personnel
8.Automatic liquid filling function: the equipment is equipped with a large capacity liquid storage tank, with or without liquid alarm function, to avoid the damage to the atomizing equipment caused by liquid shortage, and automatically fill the atomizing tank with liquid and stop automatically, which can meet the demand of one day
9.External ramp pedal: antiskid pedal is set at the entrance and exit of the equipment, which is convenient for the wheelchair of the elderly and children and the travelers to and fro
10.Lighting auxiliary function: fully considering the use of different scenes, LYD waterproof lamp is set in the passage, which can be used at night or in a dark place
11.Quick layout and transfer function: there are four casters and brakes at the bottom of the equipment, which can quickly arrive at the designated place for quick installation. The equipment uses 220V household alternating current, and the function is less than 800W. The installation is simple and fast. It only needs to connect the plug and drain and fill the disinfectant solution, without professional installation and debugging. The operation is simple, easy to learn and understand
Folded Disinfectant Passage System Application Places
Used in emergency public health events, body spray disinfection is carried out on objects, such as pets, goods and other objects passed through public space entrance, and body temperature is detected by non-contact detection.
Temperature measurement inspection at airports, customs, ports, stations, schools, factories, construction sites and other places.
Entrance inspection of important public places such as important places, exhibition halls, trade fairs, business activities, celebrations, stadiums, etc.
Installation Steps & Instructions
1.Connect the external power cord in place
2.Adjust the infrared probe at the top of the door to the place where people pass.
3.Unscrew the upper cover screw of the main box and open the main box.
4.First add liquid into the water tank.
5.Then turn on the switch (leakage protector) at the upper left corner of the main box of the bar and turn on the power on indication in the control panel (indicating that it is powered on, if not, it will not be powered on)
6.Wait a few minutes for four to five minutes. The liquid will automatically change to spray tothe spray port (the nozzle can adjust the size of the mist automatically), and it will automatically
enter the working state.
Control Panel Description
1.Lighting switch (whether lighting in adjustable channel)
2.Work indicator switch (it is on during power on work)
3.Temperature display adjustment table (can be adjusted according to the temperature difference season)
4.Emergency stop (there is no main electric switch in the whole disinfection cabin after pressing)
5.Power on indication (the whole machine is powered on)
6.Temperature measurement and detection points (15cm-20cm from the inner side of forehead and wrist to the sensing area)
Automatic Disinfection Channel System Components of equipment
1.Far infrared induction device
3.Inductive hand washing device
4.Electrical control box, disinfectant tank
Description of disinfectant supplement device
There is a self-priming pump in the spray tank. When it is short of liquid, the equipment will automatically replenish and stop automatically after full suction.
Automatic Disinfection Channel System Transportation
Packing size: wooden box, size: 1950mm x 1150mm x 750mm Quantity per 40HP: 30 sets.
Power supply: 220V / AC Weight: About 260kg Power: 450W
Operating noise: less than 36dB
Working environment: 0 ℃ - + 35 ℃ (disinfectant can't be used when it's frozen below 0 ℃)
External dimension: 2400mm (H) × 1200mm (W) × 2000mm (L) Channel size: 1950mm (H) × 1100mm (W) × 2000mm (L)
Type of disinfectant: food grade disinfectant Volume of disinfectant tank: 20 L Temperature collection distance: 15-20cm Temperature collection time: about 2 seconds
Temperature collection accuracy: plus or minus 0.5 ℃ at room temperature Temperature collection location: forehead, wrist inside (non-contact type) Temperature collection range: 34-45 ℃
The purpose of the following safety precautions is to tell you how to operate the product safely and correctly. Please read them carefully and make sure you understand them before you start to read the rest of this volume.
1.This product is only suitable for indoor and outdoor use.
2.There shall be no large metal and strong magnetic field within 2m around the installation site to avoid interference.
3.The installation site shall be as far away from power line and communication cable as possible.
4.The probe shall not be installed in high temperature and humid environment.
5.Each temperature measurement channel is attached with a warranty, which is free of charge during the warranty period.
6.Do not dismantle the components on the electrical control box without permission. 7.After the temperature measurement channel is started, it must be preheated for 2 minutes to achieve the best detection effect.
8. Avoid collision with the door when people pass.